Houston, TX · OEM parts in stock · Local serviceMon–Fri 9:00 AM – 4:00 PM · (832) 279-1961 · [email protected]
Blue Storm Air Compressor

Buyer guide · Houston, TX

How to Size a Rotary Screw Air Compressor for a Houston Shop or Plant

Buy too small and your tools starve for air. Buy too big, or the wrong type, and you pay for wasted kilowatts every hour the plant runs. Six steps to get it right. Every Kilowatt Counts. More Air, Less Power.

Quick checklist

  1. Add up the air your equipment uses (CFM)
  2. Find the highest pressure you really need (psi)
  3. Look at how your demand changes through the day
  4. Check the power at your site: single or three phase, 230 V or 460 V
  5. Plan for Gulf Coast heat and humidity: dryer, filters and ventilation
  6. Compare running cost, not just purchase price
1

Add up the air you use (CFM)

Air demand is measured as volume flow, in cubic feet per minute (CFM). List every tool and machine on the air system with its air consumption from the manufacturer’s data, then estimate how much of the time each one actually runs. Few tools run 100% of the time, so total demand is usually well below the sum of every tool at full flow.

As a general rule of thumb, many buyers add a margin of roughly 20–30% for future growth and system losses. Before buying a bigger compressor, check for air leaks: in many plants, fixing leaks is the cheapest “new capacity” there is.

2

Choose the pressure you really need (psi)

Compressor output is always stated at a pressure: the higher the pressure, the less air the same compressor delivers. Our own spec tables show it: the LG-20 belt drive delivers 69.6 CFM at 116 psi but 56.2 CFM at 174 psi.

Set the system to the lowest pressure your equipment needs at the point of use, plus allowance for pressure drop in piping, filters and dryers. A widely cited rule of thumb is that each 2 psi of extra discharge pressure adds about 1% to compressor energy use. Blue Storm models cover 116–174 psi: M Series and LGPM up to 145 psi, SE Series up to 174 psi, and LG belt drive models adjustable from 116 to 174 psi by pulley.

3

Match the compressor type to your demand profile

If your air demand rises and falls through the shift, as it does in most fabrication shops, auto body shops and plants, a permanent magnet variable speed (VSD) compressor follows demand by changing motor speed. It idles at preset pressure with no venting or unloading waste, and cuts peak current demand by up to 50%. Blue Storm PM VSD models (M, SE and LGPM Series) use IE4 motors and deliver up to 50% energy savings compared with piston compressors.

If your demand is steady and close to full output most of the time, a fixed speed compressor (LG-G direct drive or LG belt drive) can be a cost-effective choice. How variable speed saves energy →

4

Check the power at your site

Many small shops and service bays only have single-phase power. Blue Storm options for 230 V single-phase: the SE Series (5 and 10 HP), M Series 230 V models (M-10, M-15, M-20; single or three phase), the LGPM-20TD 230 V, and LG belt drive and LG-TD 4-in-1 models from 5 to 10 HP. LG and LG-TD models of 15 HP and above are three-phase only. For 460 V three-phase plants, choose the M-10S to M-50S or the LGPM-20TD 460 V. See the Single-Phase Air Compressor Houston guide for a focused overview.

Tell us your available voltage and phase in the quote form and we will confirm the right model.

5

Plan for Gulf Coast heat and humidity

Houston’s hot, humid air carries a lot of water vapor. When that air is compressed and cools down in the piping, the moisture condenses into liquid water that can reach tools, paint guns and process equipment. In a humid climate, a refrigerated dryer and proper filtration are generally worth planning for from day one.

The LGPM-20TD and LG-TD 4-in-1 Series put the compressor, air receiver, refrigerated dryer and precision filters on one base, delivering dry air with a pressure dew point of 35–50 °F (2–10 °C) and filtration to 0.01 µm, with no site piping or separate air treatment to install. See the compressed air dryer Houston guide for package options. High ambient temperatures also make compressor-room ventilation important: give the compressor a supply of cool air and a path for hot exhaust air.

6

Compare running cost, not just purchase price

Over a compressor’s life, electricity is usually the largest cost, far more than the purchase price. Use our energy cost calculator (or the Houston energy cost guide) with the rate from your own power bill to see what your compressor costs to run each year, and what every 10% of energy saved is worth.

Keep it efficient after installation too: follow the service intervals (first service at 500 hours; air filter, oil filter and separator every 3,000 hours; synthetic oil every 4,000 hours). OEM parts are stocked at our Houston facility.

Blue Storm models by air delivery

Free air delivery (FAD) from our published specifications. Use it as a starting point once you know your CFM and psi. Full details on the products page and in the 2026 catalog (PDF).

ModelPowerFAD (CFM)At psiPower supply
M-1010 HP31.2145230 V 1 or 3 ph
M-1515 HP52.9145230 V 1 or 3 ph
M-2020 HP60.0145230 V 1 or 3 ph
M-10S10 HP31.2145460 V 3 ph
M-15S15 HP52.9145460 V 3 ph
M-20S20 HP60.0145460 V 3 ph
M-30S30 HP102145460 V 3 ph
M-50S50 HP180145460 V 3 ph
SE-5T5 HP10.2174230 V 1 ph
SE-10T10 HP21.5174230 V 1 ph
LGPM-20TD20 HP60145230 V 1 ph or 460 V 3 ph
LG-20G20 HP60.0145230 V 3 ph
LG-30G30 HP102145230 V 3 ph
LG-55 HP17 / 14.5116 / 145208–230/460 V 3 ph · 208–230 V 1 ph
LG-7.57.5 HP25.4 / 20.8116 / 145208–230/460 V 3 ph · 208–230 V 1 ph
LG-1010 HP32.8 / 26.1116 / 145208–230/460 V 3 ph · 208–230 V 1 ph
LG-1515 HP58.3 / 49.1116 / 145208–230/460 V 3 ph
LG-2020 HP69.6 / 61.8116 / 145208–230/460 V 3 ph
LG-2525 HP100.6 / 91.1116 / 145208–230/460 V 3 ph
LG-3030 HP130 / 105.9116 / 145208–230/460 V 3 ph
LG-4040 HP168.1 / 147.3116 / 145208–230/460 V 3 ph
LG-5050 HP221.1 / 192.1116 / 145208–230/460 V 3 ph

LG belt drive: FAD shown at 116 / 145 psi. LG-TD 4-in-1 models share the LG belt drive air delivery for the same HP. All air outlets are NPT. Specifications subject to change.

This guide gives general guidance only. Every compressed air system is different; ask our Houston team to review your application before you buy.

Sizing FAQ

Air compressor sizing questions from Houston shops

Every Kilowatt Counts. More Air, Less Power. Can't find your answer? Our Houston team replies within one business day, Mon–Fri.

Help me size a compressor

How much CFM does my shop need?

+
List every tool and machine on the air system with its air consumption (CFM) from the manufacturer’s data, then estimate how much of the time each one actually runs. Many buyers add roughly 20–30% for future growth and system losses. Check for air leaks before buying a bigger compressor: fixing leaks is often the cheapest new capacity.

Does higher pressure reduce how much air I get?

+
Yes. Compressor output is always stated at a pressure, and the same compressor delivers less air at higher pressure. For example, the LG-20 belt drive delivers 69.6 CFM at 116 psi but 56.2 CFM at 174 psi. A widely cited rule of thumb is that each 2 psi of extra discharge pressure adds about 1% to energy use, so set the lowest pressure your equipment needs.

Should I choose a variable speed or fixed speed compressor?

+
If your air demand rises and falls through the shift, a permanent magnet VSD compressor (M, SE or LGPM Series) follows demand, idles at preset pressure with no venting or unloading waste, and delivers up to 50% energy savings compared with piston compressors. If demand is steady and close to full output most of the time, a fixed speed LG-G direct drive or LG belt drive can be cost-effective.

Which Blue Storm compressors run on 230 V single-phase power?

+
The SE Series (5 and 10 HP), the M Series 230 V models (M-10, M-15, M-20; single or three phase), the LGPM-20TD 230 V, and LG belt drive and LG-TD 4-in-1 models from 5 to 10 HP. LG and LG-TD models of 15 HP and above are three-phase only. See the single-phase guide.

Do I need a dryer in Houston?

+
Houston’s hot, humid air carries a lot of water vapor that condenses in the piping after compression. A refrigerated dryer and proper filtration are generally worth planning for from day one. The LGPM-20TD and LG-TD 4-in-1 Series put the compressor, air receiver, refrigerated dryer and precision filters on one base. See the compressed air dryer Houston guide for published dew-point and model facts.

Get a free sizing recommendation

Send us your tools or required CFM, pressure, operating hours and available power. Our Houston team replies within one business day, Mon–Fri.

Ready to cut your compressed-air energy bill?

Tell us about your application. Our Houston team will recommend the right Blue Storm model.

Call (832) 279-1961Request a Quote